2026-11-18 · 7 min read
A layover is a scheduled wait at an intermediate airport between flights. Here is what happens during one, how minimum connection time differs from sensible advice, and who pays if you miss the next flight.
A decision guide to UK tours: coach, mini-coach and independent travel compared, four buying questions, a 14-day Britain route and a pre-booking checklist.
An all-inclusive honeymoon bundles room, meals and drinks into one price. Here is what packages cover, how each region handles transfers and storms, and how to test a quote.
How does a layover work? You land at an intermediate airport, wait for a scheduled second flight, and make the connection under rules that depend on your ticket, the airports and the countries involved. This guide covers what happens in that gap, how minimum connection time differs from sensible advice, and who carries the risk if you miss the next flight.
The layover definition is simple: a scheduled wait at an intermediate airport between flights on the way to your final destination. The wait exists because the aircraft you arrive on is usually not the one you leave on, and you have to get from one gate to the next. The Points Guy's glossary entry on layovers uses the same basic definition. The airport in the middle is what people mean by a layover airport.
A connecting flight is the second flight. The layover is the wait before it. Plenty of writers use the two words loosely, so do not be thrown if a booking page blurs them.
The layover versus stopover split is murkier. The usual divide is a time threshold, and sources place it in different spots: some use separate domestic and international thresholds, and some treat only the international line as important. NerdWallet's explainer on layovers, stopovers and open-jaw flights puts all three terms side by side if you want the editorial version of the distinction. These thresholds are industry convention, not law, so do not treat any one site's cutoff as a fixed rule.
The label still matters in practice. Fares and loyalty programs treat a stopover differently from a layover, and some programs let you add a stopover under special terms. If you are planning around that, read your airline or loyalty program's own stopover rules before you book, because that page, not a blog, decides what counts.
The sequence is simple. You land and check the departures board or your airline app for the next gate. You walk, ride a shuttle or take a train through the terminal, and you board.
Some steps depend on the trip:
On a single ticket the airline usually tags your bags to the final destination, so you do not collect them. On separate tickets you usually do collect and recheck them. Treat that as a pattern, not a guarantee: look at the destination printed on your bag tag, ask at check-in, and read the airline's baggage page. For a US arrival, confirm the border steps with U.S. Customs and Border Protection and your airline before you travel.
Minimum connection time, or MCT, is the shortest gap a booking system will allow between two flights on a single itinerary. OAG's insider guide to minimum connection times describes how the data is built, including the IATA-approved data and the airport input behind it.
The key point: MCT is a floor for selling a ticket, not a comfortable amount of time. It tells you the connection can be booked, not that you will have time for a coffee or a calm walk.
MCT varies by airport, by terminal, and by whether the trip is domestic or international. Booking systems use these tables to decide which itineraries to show. The shortest layover you can book is whatever the airline's system allows for that exact airport pair.
There is no single figure that fits every connection, and an honest answer starts with where the number comes from. If you are asking how much time you need between connecting flights, the answer starts with the booking floor and ends with your own margin. The floor is set per airport pair and carrier, so the figure to trust is the one your airline's booking page shows for your exact itinerary. For the airport itself, check the airport's own connections or transfers page. Treat that minimum as the lowest acceptable gap, then add margin.
How much margin depends on a handful of factors:
For layover time on international flights, the practical rule is to allow more than you would for a domestic connection, because border checks and longer walks stack up. Editorial sites such as The Points Guy and commercial blogs publish their own timing advice. Read it as opinion, not regulation, and let the airline's guidance for your airport override it.
| Connection type | What to account for |
|---|---|
| Domestic, same terminal | Gate walk, boarding close |
| Domestic, terminal change | Transit between buildings, possible re-screening |
| International arrival | Immigration, customs, bag recheck, re-screening |
| Separate tickets | All of the above plus check-in and bag drop |
A long wait helps when it absorbs delay risk, lets you leave the airport for a meal, or protects a separate-ticket connection. It stops helping when you are stuck airside with no lounge access, no food worth eating and a bag you cannot store. At that point, a shorter, well-buffered connection is often the better trade.
On a single booking, the connection is protected. If a delay on the first flight makes you miss the second, the airline that issued the ticket is generally the one that has to rebook you, within the terms of its Contract of Carriage. That contract is the document to read for the specifics.
The US Department of Transportation's Fly Rights page is the government's consumer guide to air travel rights. It is written for US air travel, so it will not settle a dispute on a connection that sits entirely outside the United States.
With separate tickets, often called a self-transfer, each ticket stands alone. A missed second flight is usually the traveler's cost, and the second carrier's contract is where you confirm how that works.
Separate tickets change three things:
The short rule: with separate tickets, add time rather than trim it. If you are comparing options, an itinerary validator can flag connections that look too tight before you pay.
An overnight layover is a wait that spans the night. No official source defines it, so treat it as common usage rather than a rule.
A flight with a long layover forces three decisions:
A practical split: sleep in the terminal if the wait is short, the airport is comfortable, and staying airside saves you a border step. Book a hotel if you need real rest, or if your next flight is early. Go into the city when you have a clear margin, no visa hurdle, and a place to leave your bags. To weigh a long stop against a tighter routing, the Fortrip AI trip planner can lay out options around a connection.
For more planning guides, see the Fortrip blog.
You land at an intermediate airport, wait for a scheduled second flight, and board it. What you must do in between, such as re-screening, immigration or a terminal change, depends on your ticket, the airports and the countries involved.
A layover is a scheduled wait at an intermediate airport between two flights on the way to your final destination. The second flight is the connecting flight; the layover is the wait before it.
There is no single figure. Start with the minimum connection time your airline's booking page shows for your exact itinerary, then add margin for immigration, security re-screening, terminal changes and likely delays. International arrivals and separate tickets call for the most buffer.
Minimum connection time, or MCT, is the shortest gap a booking system will allow between two flights on one itinerary. It is a floor for selling the ticket, not a comfortable amount of time.
On a single ticket, the issuing airline is generally responsible for rebooking you under its Contract of Carriage. On separate tickets, a missed second flight is usually the traveler's cost, so check the second carrier's contract.
An overnight layover is a wait that spans the night. No official source defines it. You will need to decide whether to stay airside or leave the airport, check visa or transit rules for the country, and confirm what happens to your bags.

Sketch a brief. We come back with an itinerary that reads like a recommendation, not a checklist — and tell you what we’d change about it.
Try planning free